Видео

hi this video was a massive turn on - made my wood proper hard

Component name

Thank you for this video

I CANT DO THE LAST MOVEMENT WHICH YOU CAN DO.....THAT IS IF I CLICK THE LEFT MOUSE AND MOVE, THE PLANE JUST MOVES BUT THE ANIMATION WHICH YOU DO, I AM NOT ABLE TO DO IT, WHICH SETTING SHOULD I CHANGE

sir wheres the spring

your explanations very well sir, point to point well understand sir. thank you sir.

how did u selected the circle and arc both at 2:52

I love the fact you put the tools and commands at the start so i can visualize the steps beforehand

Not complaining but at the beginning you said that all dimensions are in Mm but in the video you used Cm. It’s just confusing as to which to use, please clarify that. Thank you 😅😅

Just finished the whole series. Thank you for the incredible instructions on designing in Fusion. I've taken all the steps and written them down in work instruction format so I can refer to them later down the line.

sir, I am facing problem with the contact test when it is turned off the objects are moving properly but after enabling contact sets at any position after that objects are not moving, please help I have watched again and again what you have done still I did not find a solution. Overall the projects are good for practice thanks for providing them.

hello i'm facing a problem when you are creating a new sketch in 17:42 and projecting the lines i'm doing the same thing but my lines are floating in the air they are not sticking to the components

Please don't stop keep going on my friend

My As-Built dialogue box has no "position" option. I'm using Fusion 2.0.19215 x86_64. I see now, the 'position' option has been replaced with 'snap'. I went over the steps several times, but it just wouldn't animate for me.

In the newer version of fusion cannot move only one circle to create loft, it moves both at once

Hello great video! The whole mechanism doesn't work can you tell me, why i cant move the links with my mouse cursor? Thanks

🙏 'promosm'

Many excellent videos, thank your very much for the time you spent making them for us, I appreciate it very much!

can you share me the cad model.

kde najdu výkres ?

This is absolutely cool I made a CAD Model of Geneva drive, the concept is a bit different from this though, I used fusion 360, after designing, I assigned the joints, enabled all contacts but yet the model keeps overlaying on each other. I don't know if there's a way you can help me Thanks ❤️

Why the bottom hole of the connecting rod is always wider?

5:38 cant do that project. Also this straight lines dont occur. Do you know whats going on?

awesome

please tell me how you rotated the crank shaft in 24:24

GREAT explanations! Have tried watching various tutorials, and the way that you describe your steps are great. Very easy to follow. Thank you!

Very detail and clear explanation. Thank you so much 🤩

Thank You Sir ! I had some trouble getting things to work ! but I learned thanks to you !

12:30 Hmm...🙁 I'm really disappointing with joining method. this is not right way to join turbine blade to turbine disk. you should use "Fir-Tree joint" slot method.

Nice job but don’t all the blue lines need to be black ?

thank you so much for this tutorial, sir!

Please share the file link for downloading

Please share the file link for downloading

You are a genius!

Amazing straightforward tutorial. 12:21 Fusion 360 now updated this feature, to animate the model, select all 3 joints by using shift or control key, then right click and select 'Animate Joint Relationships'

It's almost always better to add fillets to the 3d geometry than to do it in sketches. Great tutorials!

try redoing the video for this.. without all the step by step modelling the finished project but the plans you tried to get here... how to learn it.. not how to copy you and not learn new ( i can model very well . jsut motion and mechanisms get me when they are complicated and cramped)

Fantastic tutorial! Perfect speed for someone still learning Fusion. Thank you

your videos are ok but they are specific to desiging a specific part... and needs to teach more ' how and why' you do each thing. like how do you determine the slot paths.. to make the motion ... when you dont alreadxy knwo the slots on teh cam ..

YOU ARE A BEAST, Learning a lot from you, thanks a bunch! Keep it coming!

14:03 okay....🤩that's the really main part.

thank you so much brother.

Excelente pagina, estoy recien aprendiendo Fusion 360, es importante aprender a traves de los que ya utilizaron el programa. Gracias ´por la ayuda brindada.

Awesome video

Nice

Really good! 💕

Your tutorials have helped me to learn many tools and command on Autodesk fusion 360, thanks so much, I'm really grateful. Much love🥰

Today I learned…wow!! Thank you for this great tutorial!!

great.would you mind to share .f3d files

your videos are so helpful, thank you so much! Please keep up the good work :)